Building construction  >  Roof membranes / Facade membranes  >   CaPlur DaWa

Roof membranes / Facade membranes


CaPlur DaWa is a membrane for two types of application. It is designed for windproof and watertight use in façades and, simultaneously, can be used as a watertight sub-roof. The membrane consists of two-sided, highly diffusion permeable, weldable TPU coatings with embedded polyester nonwoven material and meets the requirements of the standards and technical regulations for flat sloping sub-roofs, as well as the requirements of the standards for façade membranes.

CaPlur DaWa is produced in two colours, which indicate the two application areas. The black side has an increased UV-protection, to allow façades with open joints up to a maximum of 5 cm and an open joint fraction of up to 40%, the grey side is designed for the watertight sub-roof. The multifunctional membrane can be welded at the seams and allows easy windproof and watertight connection from the roof to the wall.

When working with the material it is necessary to observe the applicable standards, the generally recognized rules of manufacturers as well as the CaPlast laying information. Subject to technical modifications.

Fields of application

• All curtained rear-ventilated façades
• Open joint fraction of up to 40% maximum and joints with a clear joint width of up to 50 mm
• Rain-proof and watertight sub-roof


• Reduced storage volume
• One-sided high UV-stability
• Protects insulation from driving snow and heavy rain
• Colour-coded identification of the respective application
• Can be hot welded and solvent welded
• Diffusion permeable
• Approved sealing against driving rain
• Weldable solutions available

Technical Data

Weight (g/m²)   →   310 ± 5 %
Building material   →   E
Resistance to water penetration   →   W1
sd-value (m)   →   0.18 ± 0.04
Tear resistance L/T (N/5 cm)   →   300/350 ± 30
Elongation L/T (%)   →   50/70 ± 10
Nail tear resistance L/T (N)   →   200/200 ± 20
Resistance to water pressure (cm WS)   →   > 400
Temperature resistance (° C)   →   - 40 to + 80
Minimum roof pitch   →  
Seam bonding agent   →   approx. 99 % THF
Outdoor exposure (UV)   →   with a 10 - year warranty*
Roll width/Roll length (m)   →   1.50/50   |   3.00/25

* This applies only to the black surface side of CaPlur DaWa for open joint fractions up to 40% maximum and joints with a clear joint width of up to 50 mm maximum.